The FT10 trimmer is mainly aimed at the educational market, where safety is of paramount importance. An light abrasive cutting disc is rotated by the motor to slit into the side wall of the vacuum forming. The FT20 is similar to the FT10 apart from the additional fence that can be used to guide your work across the machine and the ability to angle the table top which is useful if you want to sand a draft angle on wooden pattens. The fence also includes a fitting for the attachment of a vacuum cleaner to extract any sanding or plastic particles.

Trimmer FT20 Downloads

Spec sheet FT Series

Single Phase Power Requirements
230V / 50Hz 
Working surface
555 x 455mm / 21.9 x 18” 
Board size
555 x 455mm / 21.9 x 18” 
Machine width
555mm / 21.9” 
Machine depth
455mm / 18” 
Machine height
315mm / 12.4” 
Machine weight
21kg / 46.3lbs 
Table size
555 x 455mm / 21.9 x 18” 
Motor speed
Cutting capacity
Plastic sheets up to 3mm thick 

Contact us to find out more information on the Trimmer FT20 or call us on +44 (0) 1582 469 797